AHD Camera Tester
IGV-HD2800 AHD Security Camera Tester
3.5” TFT-LCD screen display/480 (RGB)*320 resolution /HD coaxial test (CVI/TVI/AHD) /PTZ control/ Color bar generator/TDR cable tester /12V 1A power output
The new HD coaxial tester is developed for the On-Site installation and maintenance of coaxial camera，it also combine other functions analog camera test, video level meter, analog signal output, IP address scan, Ping, port finder, UTP test, digital multimeter ,optical power meter and TDR cable tester etc. Its portability, user-friendly design and many other functions make the IP tester an essential tool for all installers or technicians.
- CCTV Tester
- TFT LCD
1) 3.5"TFT LCD screen display, 480（RGB）*320 resolution
2) Low power consumption, working time lasts 11 hours
3) LCD screen brightness/contrast/color saturation adjustable NTSC/PAL auto adjust
4) CVI /TVI /AHD coaxial camera image display, coaxial PTZ control and call up the camera OSD menu
5) Enhanced Color bar generator, PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful images).
6) LED Flashlight.
7) HD coaxial control, PTZ control, color bar generator shortcut key.
8) F1, F2 user-defined key
9) Visual fault locator, to test fiber’s bending and breakage * (Optional)
10) Digital Multi-meter, DC and AC voltage measurement, Resistance measurement Continuity test, Diode measurements, Capacitance measurement * (Optional)
11) Cable tracer, by sending the audio signal, enables the blue cable tracer tester to find the connected cable from messy cables. * (Optional)
12) Ping test, PING is the most conventional network debugging tools; it is used for testing if the connected IP camera or other network equipment's Ethernet port is working normally and the IP address is correct.
13) IP address scan The IP address scan can quickly search for connected IP cameras or another network device IP address
14) POE Voltage tests the PoE voltage from a PoE switch. The unit will clearly display the voltage for each wire in an Ethernet cable.
15) Port Finder，it will enable the installer to easily and quickly find the connected port for an Ethernet cable.
16) Link monitor check if the new setting IP address is occupied.
17) TDR cable test, TDR break-point and short-circuit measurement. * (Optional)
18) PTZ control and PTZ protocol analysis
19) Cable test, Test LAN cable or telephone cable, UTP cable etc, cable type and the sequence of wires will be displayed
20) Support more than 30 protocols, such as Pelco-D, Pelco-P, SAMSUNG.
21) Support RS232/RS485,rate 600 ～ 115200bps adjustable
22) Built in Lithium Ion Polymer Battery（3.7V DC 3000mAh ）
23) Image display and data control integration
24) Handheld HD coaxial tester, easy to carry and operation.
25) Optical power meter, test fiber loss and value * (Optional)
1. CCTV system installationand maintenance
2. Dome camera and All in one camera testing
3. The CCTV transmitting channel testing
4. PTZ controller
HD coaxial tester IGV-HD2800 series 【*】models are Optional
NTSC/PAL (Auto adapt)
3.5 inch digital TFT-LCD ,480（RGB）x 320 resolution
Brightness, Contrast, Saturation adjustable
1 channel BNC Input & 1 channel Output
Video Output Mode
Video Level test
Video signals measured in IRE or mV (not for TVI,CVI ,AHD)
Video level meter (Optional)
Video Level meter
PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement
Support RS232 and RS485
Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Video signal generation
Color bar generator
Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue,
white and black color )
UTP cable tester
UTP cable test
DC12V 1A power output
DC12V power output
Audio input test
Audio input test
RS485 data analysis
Captures and analyzes the command data from controlling device
CVI video signal test
1 channel CVI in（BNC interface）support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu
control over coaxial cable
TVI video signal test
1 channel TVI in（BNC interface） support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu
control over coaxial cable
AHD video signal test
1 channel AHD in (BNC interface）support AHD 2.0 version, 720p 25/30fps,1080p 25/30fps,camera OSD
menu control over coaxial cable
Find the connected POE port quickly.
Check the IP address whether is occupied
Test IP camera or Ethernet port of the other network equipment whether work normally, and check the
Cable scan (Optional) *
Search the cable by the audio signal
Display the power supply voltage and cable connection states
Digital Multimeter (Optional) *
0-660V auto/manual range, the min resolution is 0.1mV
660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A
660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ, 6.600MΩ, 66.00MΩ
6.6nf～66000uF， the min resolution is 1pf
0～2V forward voltage, the min resolution is 1mV
Display the relative power value
Built-in buzzer will sound, if resistance is lower than 50 Ω
3 times/ seconds
Optical power meter (Optional) *
Hold and display the measured value
Visual fault locator (Optional) *
Visual fault locator
Test fiber’s bending and breakage ( SM and MM fiber)
TDR Tester (Optional) *
breakpoint and short circuit measurement(BNC cable, telephone cable)
Energy saving technology, the battery icon real-time display
English/Chinese and other languages OSD menu
194mm x 112mm x 48mm / 540g
AHD CCTV Security Camera Tester
1. Video signal test
The new HD coaxial tester ,built-in high definition 3.5”LCD-TFT 480（RGB)x320 resolution, view the image, easy and directly displays the camera image , support PAL/NTSCLCD screen brightness/Contrast/Color Saturation adjustable. Suitable for field construction and maintenance work
2. HD coaxial signal test
TVI, CVI, AHD coaxial signal test, support 720p 25/30fps;1080p 25/30fps, the tester will display camera image, coaxial PTZ control and call up the camera OSD menu.
3. Video signal level test(Not for TVI CVI AHD test)
Test video signal strength attenuation, longer video signal cable will cause the image to be dim, and reduce the image dynamic range, video signal is too strong, it will cause the virtual shadow, and reduce the sharpness of the image. It also can real-display the video level value, if out of range, notices will be display in the screen.
4. PTZ controller
Display the input video images. Pan/tilt the P/T unit and zoom in/ out the image. Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed; set and call preset position.
5. Enhanced color bar generator
6. DC12V 1A output power
Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
Test LAN cable or telephone cable.
Connect LAN cable or telephone cable with the HD coaxial tester and cable tester. And then the connecting status, cable type and the sequence of wires will be displayed, as well as the serial number of the cable tester kit.
Search the Control protocol code from Multifunction keyboard or DVR by RS485 /RS232 interface, test the PTZ control command data whether received anomaly and RS485/RS232 data transmission.
Screen displays 16 hexadecimal codes such as
PELCO-P：A0 00（Add） xx xxxxxx AF xx
PELCO-D：FF 01（Add）xx xxxxxxxx
Search up the ID of PTZ camera. Help the engineer search the speed dome address quickly.
11. Cable scan (Optional) *
Send the specific signal, easy to find the connected cable from the mess cable
12. Port finder
13. IP address san
The IP address scan can quickly search for connected IP cameras or another network device IP address.
14. Link monitor
To add an IP camera or other network device to the current network group, the new IP address must not be occupied; otherwise it will cause IP conflicts and stop the equipment normal working. Link monitor can check if the new setting IP address is occupied.
15. PING test
16. PoE test
Test the PoE voltage from a PoE switch. The unit will clearly display the voltage for each wire in an Ethernet cable.
17. Visual fault locator * (Optional)
Visual Fault Locator with 650nm wavelength can emit red laser sources to test multi-mode and single mode fiber’s bending and breakage, and Continuous light-emitting and 1HZ, 2Hz modulating light output. It is indispensable tool in fiber project constructing, fiber net-work maintaining, optical component manufacture and research.
18. Digital multimeter (Optional)*
HD coaxial tester built in highly stable and reliable 33/4 digit (6600) digital multimeter. It is used for the DC and AC voltage measurement,AC and DC current measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement, Auto/Manual measuring range switching, relative value measurement and locking . It is easy operation and professionally accurate.
19. LED lamp
HD coaxial, PTZ control and color bar generator shortcut key, easy to operate
The user-defined shortcut key is designed for improving the efficiency for the engineer, anytime press, easy to operate.
22. TDR cable test * (Optional)
TDR cable testing, accurately measure BNC cable, network cable, controls cable's open circuit and short-circuits location. It greatly improves working efficiency
The IP camera tester adopts the most advanced handheld instrument specific integrated chip , achieve ultra-low power operation, with the 7 TFT-LCD High-definition screen display ,five wavelength calibration points 1625nm,1550nm ,1490nm , 1310nm , 1300nm , 850nm.Linear or nonlinear optical power display, it can measure the optical power value, and also be used for Relative measurement of optical fiber link loss.
Note：With sign“*”means functions are optional, Optional function need pay additional cost if asked to add any one of them in the tester
- IGV-TS8600 7 inch capacitive touch screen SDI camera/Analog camera/ CVI camera /TVI camera/AHD camera test WIFI 12V 2APower output / 5V 2A power bank / DC48V PoE power supply HDMI output/Video level meter/ IP camera viewer PTZ control Ping test/Link test Cable tracer
- IGV-TS1600 IP Tester 3.5 inch capacitive touch screen, IP+ Analog Tester. 12V 1A power output, Built-in WIFI
- IGV-TS91 CCTV Security Tester with 2.8' TFT-LCD Monitor / DC12V Poweroutput / Audio input / PTZ Controller / Video Level test / Video signalgenerator / UTP cable tester / PTZ data capture / PTZ address scan
- IGV-TS96 Ten-in-One CCTV Security Tester Combine the video test, Optical Power Meter, PTZ controller, video signal level test, NTSC/PAL color pattern generator, UTP cable test, PTZ protocol analysis, PTZ address scan, DC12 1A output, Audio test to one body.